The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They stop the car from being started without a key fob, and can be used to stop hotwiring and traditional forms of vehicle theft. Newer methods such as key cloning or relay theft are becoming increasingly common.
The Ghost Immobiliser was designed to fight these trends and make your vehicle unnoticeable. It is quiet and discreet and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle in order to stop key cloning and theft. It is a TASSA-approved device, and insurance companies endorse it. It is almost undetectable by thieves and operates in silence. It uses buttons on your steering wheel, the centre console, and doors to create an unique pin code that must be entered before you are able to start your car. You can create as many as 20 different sequences to improve security. The system is simple to install and doesn't require any additional wiring or hardware.
It is recommended that you use an authorised CAN immobiliser installer that specialises in the specific type of vehicle you have to ensure the most effective results. Ideally, they will have a workshop located in your area that allows you to visit and get your installation completed. You will also find a range of tools and equipment that can assist you in the installation. They will have basic hand tools, multimeters, insulation tape, and heat shrink tubing to safeguard the connections. A user's manual will give instructions specific to the wiring in your vehicle.
Before starting the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires as an incorrect identification could result in unintentional system integration. It is also a good idea to mark the wires with small bits of tape or mark them. Additionally, you can utilize a multimeter for verification that the power source you have identified is able to provide a consistent 12V power supply.
Advanced thieves can use a variety of tactics to evade the Ghost Immobiliser, which includes blocking and using spoofing signals. These methods are based on amplifying the signal that is sent from your key fob to the vehicle's electronic control unit. With the latest anti-jamming technology and constant monitoring your vehicle will be protected from these sophisticated attacks.
Security Increased
A ghost immobiliser provides an additional layer of protection to your car against theft. It uses an PIN protection system that is entered by pressing buttons on the dashboard or steering wheel which makes it more difficult for thieves to take your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of lights or other indicators that would warn thieves of its presence. It communicates with your car's ECU on the data bus, so it is not susceptible to the same hacking and relay attacks that can disable traditional security systems.
The system is a valuable investment for those who own prestige cars, since they are at a greater risk of being stolen because of their value and the popularity. Its enhanced security features protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers may be paired with an app, allowing you can easily arm and disarm them. They can also have an option for service/valet that allows you to temporarily disable them while your vehicle is being repaired or serviced.
Ghost immobilisers have another excellent feature that it doesn't require any wire cutting. This is a nice option, particularly if you own a brand newer vehicle that does not have any immobiliser built-in technology. Certain systems also work with GPS tracking devices, providing an extra layer of security to your vehicle. A GPS tracker may also reduce your insurance costs. If you opt to buy a ghost immobiliser be sure it is TASSA certified and a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicle that will protect your prized possessions from theft. It utilizes buttons on your steering wheel, the centre console, or door panels to generate a unique pin code, which you must enter before you can drive your car. The system is secure and undetectable. It's also comes with a three-year guarantee. It is also fully accredited by insurance companies, which means that it could help reduce your premiums.
The Ghost system is different from traditional immobilisers that rely on the key fob for ignition control. It connects directly to the engine controller through the CAN bus. This means that it is impervious to tampering, and is virtually impossible to disable or remove and cannot be targeted by organized car theft criminal gangs. The Ghost system can also be paired with an iPhone app to allow remote monitoring and management.
You can design an PIN that is simple to remember, but mathematically unattainable to thieves. You can alter and customize the PIN at anytime to protect your vehicle even when it's located in a parking lot or on the street. You can also choose a valet or service mode in case you need someone who is not driving your car temporarily, for example when you're in the garage for servicing. This feature will also help keep your vehicle from being stolen by a shady mechanic. To give you more security, you can opt for a Ghost call alert which will notify you if your car is moving or if it's moved.
Convenience
The ghost immobilise r is a highly efficient security device, protecting your vehicle from common methods of theft such as key cloning, key stealing and relay attacks. It works by connecting to the vehicle's data network CAN, and blocking communication with engine ECU. This makes it difficult for thieves to copy or hack your car, making the installation of this system a good idea for any driver.
Once installed, you will have to enter a PIN sequence up to 20 digits long using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely hidden and inaccessible to thieves as it does not emit any radio frequency signals. It can also be configured to allow a user-changeable PIN code, which adds security. The system is also designed to prevent cutting the circuit, making it virtually impossible to alter.
Some systems allow you to communicate directly with the immobiliser via an app on your smartphone, disarming it immediately in the event that you forget your PIN. Some even come with a service/valet mode that allows you to start your vehicle temporarily, such as when you have to drop it off for servicing or valet parking.
The Ghost Immobiliser is also unnoticeable to thieves because it does not transmit any radio signals, a major benefit over other aftermarket car security systems. It is also easy to use and doesn't require complex wiring. It can be used in conjunction with dash cams for additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to guarantee maximum performance and longevity.
Installation
It is crucial to select the best immobiliser ghost to safeguard your vehicle from thieves. This device can prevent car thefts by blocking the communication between key fobs as well as the engine controller unit. This stops thieves from stealing the signal and copying your key fob in order to start your vehicle. It also detects if it has been tampered and notify the owner of the vehicle.
The device is easy to install and works with the existing systems in your vehicle. It requires no modification to the vehicle's wiring and can be concealed in a secluded place, like under the dashboard. To ensure that the device is properly installed, follow the instructions in the manual for the user. It is also important to test the system following installing it. This will confirm that the immobiliser ghost is functioning in the way it is intended.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to remove the system or bypass it. Installation typically takes between 2 and 3 hours.
It is recommended to consult the wiring diagram of your vehicle during the installation process. This will enable you to identify the CAN High and CAN Low wires that are required to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure they are secure and insulated.
After the installation is completed after which you can use the Ghost Immobiliser in normal operation. It will shut off the ignition of your vehicle if it is not able to start it with the correct PIN, which you will need to enter yourself. The ghost cost of immobilisers can also be set to service/valet mode when you have to hand over your vehicle for servicing or valet parking.